Feuling Parts Camchest Kit — 487 — Chain Drive — Oil Cooled — Race Series® Short Travel Lifters — M8

Kit Includes:

• 487 Reaper Camshaft

• HP+ Pushrods

• Race Series® Short Travel Lifters

• High Flow Camplate

• Race Series® Oil Pump

• Cam Installation Kit

• ARP Rocker Studs and Nuts

• Camplate/Oil Pump Fasteners

• 487 Reaper® Chain Drive Camshaft, Cam Installation Kit, Race Series® Short Travel Lifters, One Piece Pushrod, Race Series® Oil Pump, High Flow Camplate, and ARP Rocker Studs and Nuts, Camplate/Oil Pump Fasteners are included in this kit
• 487 Reaper Camshaft
• Chain Drive
• RPM range 2,250 - 6,100
• Engineered specifically as a bolt-in camshaft upgrade for factory 114" and 117" M8 engines
• Responds very well to increased bore and or compression
• Maintains bottom end power and pulls hard above 2,950 rpm when compared to stock
• Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio.
• Cam Installation Kit
• Includes cam bearing, cam/crank hardware and gasket/O-ring kit
• Race Series® Short Travel Lifters
• Hydraulic lifters made from machined steel designed with 0.115" of travel
• One Piece Pushrods
• HP+ 0.165 wall thickness, +0.040, one piece
• Race Series® Oil Pump
• High flow 2.250 Chrome Moly gerotor gears
• 27% more pressure and scavenge gear volume over stock
• 42% more scavenge volume with matched passages, port sizing and holes to the engine case
• 46% more oil volume to the crankshaft and connecting rod bearing
• 15°- 25° cooler engine temperatures
• 15°- 30° cooler oil temperatures
• 10-30 more PSI of oil pressure
• Reduces wet sumping, blow by and oily air cleaners
• Magnets in oil pump to help protect gears and pressure relief valve
• FEULING® test results show a 50% reduction of engine sump oil level.
• High Flow Camplate
• Rear wheel power gains of 2 horsepower and 2 ft lb of torque can be achieved
• Made in the USA
• Feuling does not recommend tuning beyond stock emissions standards.
• To install this kit on a stock 107" engine, you cannot use the included one-piece pushrods. You must purchase a separate set of Adjustable Pushrods to manually set the correct lifter preload for your 107" motor. Using the included one-piece pushrods on a 107" engine will cause catastrophic valvetrain damage.

Exhaust Open

44°

Intake Lift at TDC

0.180"

Intake Open

20.5°

Application

Oil Cooled

Exhaust Close

17.5°

Exhaust Lift at TDC

0.146"

Exhaust Lift

0.487"

Intake Duration

237°

Type

Chain Drive

Units

Kit

Intake Lobe Centerline

98.5°

Riding Style

Street

Grind

487 Series

Intake Close

37°

Intake Lift

0.478"

Exhaust Lobe Centerline

103.25°

Model

Reaper

Exhaust Duration

241.5°

Features

Short Travel Lifters

Shipping weight

11.06 lb

Package size

16.5 × 11.1 × 6.2 in

Country of origin

USA

Salto part #

0925-1621

Feuling Parts part #

7272ST

In stock at a distributor warehouse. Ships in 2–4 business days by ground.

Ground shipping is $14.95, free on orders over $150. Stock is re-checked with the warehouse before your card is charged.

California: this part can’t ship to a California address.

Is it in stock?

Yes — the distributor shows it on a shelf at a regional warehouse right now. We check again the moment you order, before anything is charged.

How fast will it get to me?

Usually 2–4 business days by ground.

Will it fit my machine?

The distributor lists it for the models in the Fitment section above. Not sure about your trim or year? Call the counter at 801-361-3010 and we’ll check it with you.

Is this genuine Feuling Parts?

Yes. It ships new from the same distributors the big online stores buy from — Feuling Parts part #7272ST.