Feuling Parts Camchest Kit — 487 — Center/Water Cooled — Race Series Short Travel Lifters — M8

Not for VVT water cooled engines.

Kit Includes:

• 487 Reaper Chain Drive Camshaft

• Cam Installation Kit

• Race Series® Short Travel Lifters

• One Piece HP+® Pushrods

• Race Series® Oil Pump

• High Flow Camplate

• ARP Rocker Studs and Nuts

• Camplate/Oil Pump Fasteners

• 487 Reaper® Chain Drive Camshaft, Cam Installation Kit, Race Series® Sort Travel Lifters, One Piece Pushrod, Race Series® Oil Pump, High Flow Camplate, and ARP Rocker Studs and Nuts, Camplate/Oil Pump Fasteners are included in this kit
• 487 Reaper Camshaft.
• Bolt-in
• Chain Drive
• Camshaft for 114" and 117" engine
• Responds very well to increased bore and or compression
• Maintains bottom end power and pulls hard above 2,950 rpm when compared to stock
• RPM range 2,250 - 6,100
• 38° overlap
• Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio.
• Cam Installation Kit
• Includes cam bearing, cam/crank hardware and gasket/O-ring kit
• Race Series® Short Travel Lifters
• Short travel hydraulic roller lifters, standard OD (0.8420-0.8423)
• Designed with 0.115 of total travel
• One Piece Pushrod
• HP+ 0.165 wall, +0.040 longer
• Heavy duty 7/16" diameter tube with 0.165 wall thickness, precision concentricity, heat treated with a black oxide finish
• Race Series® Oil Pump
• Increase oil pressure, scavenge volume and engine oil flow
• 30% more pressure gear volume over stock
• 53% more scavenge gear volume over stock
• 42% more scavenge volume with port sizing, matched passages and holes to the engine case
• 46% more oil volume to the crankshaft and connecting rod bearing
• 15°- 25° cooler engine temperatures
• 15°- 30° cooler oil temperatures
• 10-30 more PSI of oil pressure
• Reduces wet sumping, blow by and oily air cleaners
• Magnets in oil pump to help protect gears and pressure relief valve
• Rear wheel power gains of 2 horsepower and 2 ft. lb. of torque are achieved.
• FEULING test results show a 50% reduction of engine sump oil level.
• High Flow Camplate
• Bolts into stock location
• Billet 7075 aluminum
• Made in the USA
• Feuling does not recommend tuning beyond stock emissions standards.

Exhaust Duration

241.5°

Features

Short Travel Lifters

Exhaust Lift at TDC

0.146"

Grind

487 Series

Intake Duration

237°

Intake Lift at TDC

0.180"

Model

Reaper

Riding Style

Street

Intake Close

37°

Exhaust Lobe Centerline

103.25°

Exhaust Open

44°

Intake Open

20.5°

Application

Water Cooled

Exhaust Lift

0.487"

Intake Lift

0.478"

Intake Lobe Centerline

98.5°

Exhaust Close

17.5°

Type

Chain Drive

Units

Kit

Shipping weight

11.13 lb

Package size

16.4 × 11.1 × 6 in

Country of origin

USA

Salto part #

0925-1623

Feuling Parts part #

7273ST

In stock at a distributor warehouse. Ships in 2–4 business days by ground.

Ground shipping is $14.95, free on orders over $150. Stock is re-checked with the warehouse before your card is charged.

California: this part can’t ship to a California address.

Is it in stock?

Yes — the distributor shows it on a shelf at a regional warehouse right now. We check again the moment you order, before anything is charged.

How fast will it get to me?

Usually 2–4 business days by ground.

Will it fit my machine?

The distributor lists it for the models in the Fitment section above. Not sure about your trim or year? Call the counter at 801-361-3010 and we’ll check it with you.

Is this genuine Feuling Parts?

Yes. It ships new from the same distributors the big online stores buy from — Feuling Parts part #7273ST.